Crestron part number HD-DA2-4KZ-E
The Crestron HD-DA2-4KZ-E is a 1:2 HDMI distribution amplifier that splits one source to feed two displays, switchers or other devices. It handles 4K60 4:4:4 and HDR video with high-bitrate 7.1 audio, and it works without any programming or control system.
Price on request
The price isn't hidden. Crestron asks its dealers to share it with you directly rather than publish it online, so tap Request a quote and we'll send it straight to you.
Prefer to talk? Dublin 01 906 9326 Cork 021 202 8107 WhatsApp us
Need it installed? Our Crestron certified engineers install, set up and programme everything we supply. A 4 hour visit is €440 and a full day €880, plus VAT.
About the Crestron HD-DA2-4KZ
The amplifier takes a single HDMI input and drives two HDMI outputs at the same time. It supports HD 1080p, UHD 4K and DCI 4K sources and displays, including 3D video, Deep Color and HDR10, and passes audio formats such as Dolby TrueHD, Dolby Atmos, DTS HD, DTS:X and uncompressed 7.1 linear PCM. The input is compatible with DVI and Dual-Mode DisplayPort sources.
A three-position slide switch sets HDCP handling to 2.2, 1.4 or off; with HDCP off, encrypted content is blanked. EDID can run in DEFAULT mode, where the factory EDID is 4K60 4:4:4 non-HDR video with 2-channel LPCM audio, or in COPY 1ST mode. The USB 2.0 service port accepts a flash drive for firmware updates and custom EDID uploads. Note that the unit does not pass CEC.
Power comes from the included PW-2407WU 24 VDC power pack, and typical consumption is 4.3 W. The black metal chassis is 22 mm high, 146 mm wide and 119 mm deep, with two integral mounting flanges for freestanding, surface or single rack rail mounting. For more outputs, the HD-DA4-4KZ-E and HD-DA8-4KZ-E split one source to four and eight outputs. This page covers the HD-DA2-4KZ-E part number.
Key features
- Splits one HDMI source to two outputs
- 4K60 4:4:4 and HDR10 video, with 3D and Deep Color
- Dolby TrueHD, Dolby Atmos, DTS HD, DTS:X and 7.1 linear PCM audio
- Selectable HDCP 2.2, HDCP 1.4 or off
- EDID management with DEFAULT and COPY 1ST modes
- Input and output video presence LEDs
- No programming or control system required
- Slim 22 mm high chassis with PW-2407WU power pack included
HD-DA2-4KZ specifications
| Inputs and outputs | 1 HDMI input; 2 HDMI outputs (Type A) |
|---|---|
| Video | Up to 4096x2160 or 3840x2160 at 60 Hz 4:4:4 (24 bit) or 4:2:2 (36 bit); HDR10, 3D, Deep Color |
| Compatibility | Input DVI and Dual-Mode DisplayPort compatible; outputs DVI compatible |
| Audio | Dolby TrueHD, Dolby Atmos, DTS HD, DTS:X, uncompressed 7.1 linear PCM |
| HDCP | Selectable HDCP 2.2, HDCP 1.4 or off (encrypted content blanked when off) |
| EDID and CEC | DEFAULT or COPY 1ST EDID modes; CEC is not passed |
| USB | USB 2.0 host port for firmware update and custom EDID upload from a flash drive |
| Power | 24 VDC 0.75 A from PW-2407WU power pack (included, 100-240 VAC input); 4.3 W typical |
| Mounting | Freestanding, surface mount or single rack rail; black metal chassis with 2 integral mounting flanges |
| Dimensions | Height 22 mm (0.87 in), width 146 mm (5.73 in), depth 119 mm (4.67 in) |
Part numbers on this page
| Part number | Version | Price | Add |
|---|---|---|---|
| HD-DA2-4KZ-E | Standard | On request |
Where the HD-DA2-4KZ is used
Works with the HD-DA2-4KZ
Crestron installed by 1Install
We supply, install and programme Crestron in homes and businesses across Ireland. These photos are from our own installations. See more in our projects, or budget a whole system with our Quote Builders for homes and meeting rooms.



Questions about the Crestron HD-DA2-4KZ
What does the Crestron HD-DA2-4KZ-E do?
It is a 1:2 HDMI distribution amplifier. It takes one HDMI source and splits it to two separate outputs, so the same picture and sound can feed two displays, switchers or other devices. It supports 4K60 4:4:4 and HDR video with high-bitrate 7.1 audio.
Does the HD-DA2-4KZ need programming or a control system?
No. The HD-DA2-4KZ-E works without programming or a control system. HDCP handling is set with a three-position slide switch (off, 1.4 or 2.2), a SETUP button restores factory settings, and LEDs show video presence at the input and at each output.
How does the HD-DA2-4KZ-E handle HDCP, EDID and CEC?
HDCP is switchable between 2.2, 1.4 and off, and encrypted content is blanked when HDCP is off. EDID runs in DEFAULT mode, with a factory EDID of 4K60 4:4:4 non-HDR video and 2-channel LPCM audio, or in COPY 1ST mode. Custom EDIDs load from a USB flash drive. CEC is not passed.
How is it powered and mounted?
It runs from the included PW-2407WU power pack (100 to 240 VAC in, 24 VDC 0.75 A out) and typically uses 4.3 W. The black metal chassis has two integral mounting flanges for freestanding, surface or single rack rail mounting, and it measures 22 mm high, 146 mm wide and 119 mm deep.
What if I need more than two outputs?
Crestron points to two larger models. The HD-DA4-4KZ-E splits one HDMI source to four outputs and the HD-DA8-4KZ-E splits it to eight, both with 4K60 4:4:4, HDR and high-bitrate 7.1 audio support and the same PW-2407WU power pack.
How much is the Crestron HD-DA2-4KZ?
Crestron asks its dealers to give the price of the HD-DA2-4KZ directly rather than publish it online. Add it to your quote list and we will send you a written quote, with delivery, and installation and programming if you need them.
Can 1Install supply, install and programme the HD-DA2-4KZ?
Yes. 1Install is an authorised Crestron Elite Partner with offices in Skerries, Co. Dublin and Cork. We can supply the HD-DA2-4KZ on its own, or install, set up and programme it as part of your system. Installation visits are €440 for 4 hours or €880 for a full day, plus VAT and travel.
Does the HD-DA2-4KZ come with a warranty?
Yes. Everything we supply is new, genuine Crestron with Crestron's standard warranty. If the HD-DA2-4KZ develops a fault, contact us and we will handle the claim with Crestron. If we installed it, our workmanship is guaranteed for the lifetime of the system.
Is the HD-DA2-4KZ in stock?
We order Crestron for each quote, so availability depends on Crestron's stock at the time. We check it before we quote and put the expected delivery date on your quote, so you know where you stand before you pay.
Can I buy the HD-DA2-4KZ without installation?
Yes. We supply Crestron to end users, with or without installation. If you are not sure it suits your system, send us the part numbers you already have and we will check.
More from AV switching and extension
-
HD-PS401
4x1 4K60 4:4:4 HDR Presentation System
Price on request -
HD-PS622
8x2 4K60 4:4:4 HDR Presentation System
Price on request -
HD-MD4X1-4KZ
4x1 4K60 4:4:4 HDR AV Switcher
Price on request -
HD-MD8X8-4KZ
8x8 4K60 4:4:4 HDR AV Switcher
Price on request -
HD-TXC-4KZ-101
DM Essentials 4K60 4:4:4 Transmitter for HDMI, RS-232, and IR Signal Extension over CATx Cable
Price on request -
HD-RXC-4KZ-101
DM Essentials 4K60 4:4:4 Receiver for HDMI, RS-232, and IR Signal Extension over CATx Cable
Price on request