Crestron shop

Crestron CEN-IO-IR-204 Wi-Fi I/O Extender with 4 IR/Serial Ports

Crestron part number CEN-IO-IR-204

The Crestron CEN-IO-IR-204 is a compact Wi-Fi network I/O extender that adds four IR and 1-way serial ports to a Crestron control system. It connects over 802.11a/b/g/n Wi-Fi, runs from an included 5 VDC power pack and is built in the stackable IFE micro enclosure.

Price on request

The price isn't hidden. Crestron asks its dealers to share it with you directly rather than publish it online, so tap Request a quote and we'll send it straight to you.

Prefer to talk? Dublin 01 906 9326 Cork 021 202 8107 WhatsApp us

Installation and programming

Need it installed? Our Crestron certified engineers install, set up and programme everything we supply. A 4 hour visit is €440 and a full day €880, plus VAT.

Book an installation
Crestron CEN-IO-IR-204 Wi-Fi Network I/O Extender with 4 IR Ports

About the Crestron CEN-IO-IR-204

The four IR/serial outputs share one 8-pin 3.5 mm detachable terminal block. Each can control a device by infrared at up to 1.2 MHz or by 1-way serial TTL/RS-232 (0 to 5 V) at up to 115.2k baud. As the extender talks to the control system over Wi-Fi, it needs no network cable where it is fitted, only power from the included pack.

Its 802.11a/b/g/n radio works on 2.4 or 5 GHz with static IP or DHCP, supports 64 and 128-bit WEP, WPA and WPA2-PSK with TKIP and AES, and memorises up to five access points. Range is up to 50 feet (15 m), subject to site conditions. A wireless access point and an Ethernet-enabled Crestron control system are required, and TLS 1.2 and local authentication are supported.

The PW-0510WUL power pack in the box accepts 100 to 240 VAC and supplies 5 VDC at 1.2 A; the extender uses 1.1 W typical. Setup is through Crestron Toolbox via the Micro-USB console port, or a web browser. The IFE micro enclosure measures 34 x 128 x 73 mm, weighs 180 g, and mounts freestanding, stacked, or on a surface or 35 mm DIN rail. The wired PoE version is the CEN-IO-IR-104.

Key features

  • Four IR/1-way serial output ports
  • IR up to 1.2 MHz; serial TTL/RS-232 (0 to 5 V) up to 115.2k baud
  • Wi-Fi 802.11a/b/g/n on 2.4 or 5 GHz
  • Memorises up to five wireless access points
  • Included 5 VDC power pack, 1.1 W typical
  • Setup via Crestron Toolbox or a web browser
  • Compact, stackable IFE micro enclosure for surface or DIN rail

CEN-IO-IR-204 specifications

IR/serial ports4 outputs on one 8-pin 3.5 mm detachable terminal block
IR1-way, up to 1.2 MHz
Serial1-way TTL/RS-232 (0 to 5 V), up to 115.2k baud
WirelessIEEE 802.11a/b/g/n Wi-Fi, 2.4 or 5 GHz; static IP or DHCP; up to 50 ft (15 m)
Wireless security64 and 128-bit WEP, WPA and WPA2-PSK with TKIP and AES
Requirements802.11a/b/g/n wireless access point and Ethernet-enabled Crestron control system
PowerIncluded PW-0510WUL pack: 100 to 240 VAC in, 5 VDC 1.2 A out; 1.1 W typical
MountingFreestanding, stackable, surface or 35 mm DIN rail (EN 60715); 8 DIN module spaces (144 mm)
Dimensions34 x 128 x 73 mm (H x W x D); 45 x 136 x 85 mm with bracket
Weight180 g (6.4 oz)

Part numbers on this page

Part numberVersionPriceAdd
CEN-IO-IR-204 Standard On request

Where the CEN-IO-IR-204 is used

  • Adding IR control where no network cable reaches the equipment
  • Existing rooms where new network cabling is difficult
  • IR or 1-way serial devices within Wi-Fi range of an access point
  • Commercial and residential Crestron systems

Works with the CEN-IO-IR-204

Crestron installed by 1Install

We supply, install and programme Crestron in homes and businesses across Ireland. These photos are from our own installations. See more in our projects, or budget a whole system with our Quote Builders for homes and meeting rooms.

Crestron controlled shelf lighting in a Dublin retail boutique
Crestron controlled shelf lighting in a Dublin retail boutique
Neatly dressed structured cabling for a Cork office
Neatly dressed structured cabling for a Cork office
Country house at dusk with Crestron lighting in Waterfall, Cork
Country house at dusk with Crestron lighting in Waterfall, Cork

Questions about the Crestron CEN-IO-IR-204

What is the Crestron CEN-IO-IR-204?

It is a compact Wi-Fi network I/O extender that adds four IR/1-way serial ports to a Crestron control system. Each port can control a device by infrared at up to 1.2 MHz or by serial TTL/RS-232 at up to 115.2k baud, and the extender runs from an included 5 VDC power pack.

What does the CEN-IO-IR-204 need to work?

Crestron specifies an 802.11a/b/g/n wireless access point and an Ethernet-enabled Crestron control system. The extender works on 2.4 or 5 GHz, can memorise up to five access points and has a range of up to 50 feet (15 m), subject to site conditions.

Can the CEN-IO-IR-204 receive feedback from devices?

No. Its ports provide 1-way control only, by infrared up to 1.2 MHz or serial TTL/RS-232 (0 to 5 V) up to 115.2k baud. For 2-way RS-232 control over Wi-Fi, the CEN-IO-COM-202 offers two bidirectional COM ports with hardware and software handshaking.

How is the CEN-IO-IR-204 powered?

It comes with a PW-0510WUL power pack that accepts 100 to 240 VAC at 50/60 Hz and delivers 5 VDC at 1.2 A to a 2-pin terminal block. Typical consumption is 1.1 W. For PoE power over a network cable, the wired CEN-IO-IR-104 is the alternative.

How is the extender mounted?

The black and blue IFE micro enclosure, 34 mm high, 128 mm wide and 73 mm deep, can stand freely, be stacked, or fix to a flat surface or 35 mm DIN rail using the included bracket, taking 8 DIN module spaces (144 mm). Rack and pole mount options are available.

How much is the Crestron CEN-IO-IR-204?

Crestron asks its dealers to give the price of the CEN-IO-IR-204 directly rather than publish it online. Add it to your quote list and we will send you a written quote, with delivery, and installation and programming if you need them.

Can 1Install supply, install and programme the CEN-IO-IR-204?

Yes. 1Install is an authorised Crestron Elite Partner with offices in Skerries, Co. Dublin and Cork. We can supply the CEN-IO-IR-204 on its own, or install, set up and programme it as part of your system. Installation visits are €440 for 4 hours or €880 for a full day, plus VAT and travel.

Does the CEN-IO-IR-204 come with a warranty?

Yes. Everything we supply is new, genuine Crestron with Crestron's standard warranty. If the CEN-IO-IR-204 develops a fault, contact us and we will handle the claim with Crestron. If we installed it, our workmanship is guaranteed for the lifetime of the system.

Is the CEN-IO-IR-204 in stock?

We order Crestron for each quote, so availability depends on Crestron's stock at the time. We check it before we quote and put the expected delivery date on your quote, so you know where you stand before you pay.

Can I buy the CEN-IO-IR-204 without installation?

Yes. We supply Crestron to end users, with or without installation. Like most Crestron devices of this type, it needs setting up or programming before it works in a system, and we can quote for that too.

More from Control processors and interfaces

Browse all of Control processors and interfaces

Start a conversation

Let's plan your space together.

Tell us a little about your project and a member of the team will be in touch.

Contact us for a meetup to discuss your needs

WhatsApp us