Crestron ZUMLINK-KP Zūm Wired Keypad with Rocker Button, White

It is a Zūm wired keypad with Zūm Link communication, fitted with a preprogrammed rocker button in white. It controls one or more Zūm Link J-Box load controllers, such as the ZUMLINK-JBOX-16A-LV, ZUMLINK-JBOX-20A-SW and ZUMLINK-JBOX-20A-PLUG, as part of a Zūm wired commercial room lighting system.

Yes. As well as the preprogrammed rocker, it can be configured with engraved or pad printed button trees of four, six or eight buttons: ZUMLINK-BTN4, ZUMLINK-BTN6 and ZUMLINK-BTN8. These are not included. Button trees and bezels are listed in almond, black, grey, red and white.

It is powered by the 24V Zūm Link bus and draws a maximum of 5 mA. Two RJ-45 Zūm Link ports connect it to a Zūm Link device for load control and daisy-chain it with other devices in the room, with up to 750mA of pass-through current. It uses RS485 communications.

The keypad has Bluetooth low energy, version 4.0, and pairs with a mobile device running the Zūm app, which is used to configure the room. The rocker button comes preprogrammed, and a green LED shows the on or off status of the connected load and lights briefly on each button press.

It mounts in a 1-gang, 3.5 in. (89 mm) deep electrical box and requires a matching decorator style faceplate from the FP-G Series. Neither the box nor the faceplate is supplied. The keypad itself measures 105 mm high, 38 mm wide and 33 mm deep and weighs 142 g (5 oz).

Crestron asks its dealers to give the price of the ZUMLINK-KP directly rather than publish it online. Add it to your quote list and we will send you a written quote, with delivery, and installation and programming if you need them.

Yes. 1Install is an authorised Crestron Elite Partner with offices in Skerries, Co. Dublin and Cork. We can supply the ZUMLINK-KP on its own, or install, set up and programme it as part of your system. Installation visits are €440 for 4 hours or €880 for a full day, plus VAT and travel.

Yes. Everything we supply is new, genuine Crestron with Crestron's standard warranty. If the ZUMLINK-KP develops a fault, contact us and we will handle the claim with Crestron. If we installed it, our workmanship is guaranteed for the lifetime of the system.

We order Crestron for each quote, so availability depends on Crestron's stock at the time. We check it before we quote and put the expected delivery date on your quote, so you know where you stand before you pay.

Yes. We supply Crestron to end users, with or without installation. Like most Crestron devices of this type, it needs setting up or programming before it works in a system, and we can quote for that too.