Crestron GLA-IR-QUATTRO-COM1-WR Line Voltage PIR Presence Detector

It is the STEINEL IR Quattro COM1-WR, a line voltage passive infrared presence detector offered by Crestron. It provides lighting control at 120/230/277 VAC, 50/60 Hz, needs only minimal movement to detect a person, and can turn the lights off when there is sufficient daylight.

It is a line voltage detector for lighting control at 120/230/277 VAC, 50/60 Hz. The IR Quattro COM1-24 is the low voltage model, running on 18-24 VDC/VAC with a power pack or building automation system, so check which type your system uses before ordering.

It lets the designer optimise the detector's reach for each lighting zone without compromising sensitivity, so presence is detected precisely in the intended zone. The detector uses a single pyroelectric sensor and a lens system with 1760 switching zones in a square pattern.

Crestron lists mounting to a 4-inch square box, a 4-inch octagon box or a round 3.0 mud-ring. A wireless remote commissioning set up tool and a user wireless remote are available for setting up and using the detector.

You can choose manual ON (MAN) or automatic (AUTO) mode, a momentary or maintained switch option, and ON only or ON and OFF manual switching. COM-Link lets multiple sensors link together over the communication link.

Crestron asks its dealers to give the price of the GLA-IR-QUATTRO-COM1-WR directly rather than publish it online. Add it to your quote list and we will send you a written quote, with delivery, and installation and programming if you need them.

Yes. 1Install is an authorised Crestron Elite Partner with offices in Skerries, Co. Dublin and Cork. We can supply the GLA-IR-QUATTRO-COM1-WR on its own, or install, set up and programme it as part of your system. Installation visits are €440 for 4 hours or €880 for a full day, plus VAT and travel.

Yes. Everything we supply is new, genuine Crestron with Crestron's standard warranty. If the GLA-IR-QUATTRO-COM1-WR develops a fault, contact us and we will handle the claim with Crestron. If we installed it, our workmanship is guaranteed for the lifetime of the system.

We order Crestron for each quote, so availability depends on Crestron's stock at the time. We check it before we quote and put the expected delivery date on your quote, so you know where you stand before you pay.

Yes. We supply Crestron to end users, with or without installation. Like most Crestron devices of this type, it needs setting up or programming before it works in a system, and we can quote for that too.