- Home
- Crestron shop
- Lighting control
- ZUMLINK-IR-QUATTRO-HD-DLS
Crestron part number ZUMLINK-IR-QUATTRO-HD-DLS
The Crestron ZUMLINK-IR-QUATTRO-HD-DLS is a STEINEL high-definition passive infrared presence detector with daylight sensing and Zūm Link communication for Zūm wired lighting control. Four infrared pyroelectric detectors give it a maximum detection zone of 50 x 50 ft (2,500 sq ft) from a single ceiling position.
Price on request
The price isn't hidden. Crestron asks its dealers to share it with you directly rather than publish it online, so tap Request a quote and we'll send it straight to you.
Prefer to talk? Dublin 01 906 9326 Cork 021 202 8107 WhatsApp us
Need it installed? Our Crestron certified engineers install, set up and programme everything we supply. A 4 hour visit is €440 and a full day €880, plus VAT.
About the Crestron ZUMLINK-IR-QUATTRO-HD-DLS
High-definition PIR detection uses four infrared pyroelectric detectors and a 360° pattern of square detection zones that can be scaled mechanically. Crestron lists a maximum zone of 50 x 50 ft (2,500 sq ft), or 15 x 15 m (225 sq m), for major motion as described by NEMA WD7. A closed loop daylight sensor with a light level setting of 10 to 1000 lux (1 to 100 fc) lets the lighting respond to natural light as well as occupancy.
It is part of the wired Zūm Link range for Zūm commercial lighting. Two orange RJ-45 ports daisy-chain it with load controllers, keypads and other sensors in the room over CBL-CAT5E-ZUMLINK-P CAT5e cable, sold separately. It communicates over the Zūm Link network, draws a maximum of 17 mA from the Zūm Link bus and is compatible with the Zūm wired keypad.
This version has no output relay. If the existing sensor also switches HVAC or another relay-input capable device, the ZUMLINK-IR-QUATTRO-HD-DLS-RLY adds that relay. The plastic housing mounts directly in the ceiling, in a 4 in. square or round junction box or on a 3 in. mud ring (not included), and measures 121 mm square by 72 mm deep. It is IP20 rated, UL Listed and designed for 0° to 40°C.
Key features
- High-definition passive infrared detection with four pyroelectric detectors
- 360° coverage with mechanically scalable square zones
- Maximum detection zone of 50 x 50 ft (2,500 sq ft)
- Closed loop daylight sensor with a 10 to 1000 lux setting
- Zūm Link communication and daisy-chaining over two RJ-45 ports
- Powered by the Zūm Link bus, 17 mA maximum
- Compatible with the Zūm wired keypad
- Ceiling mount, IP20 rated and UL Listed
ZUMLINK-IR-QUATTRO-HD-DLS specifications
| Detection | High-definition passive infrared (PIR); 4 infrared pyroelectric detectors |
|---|---|
| Coverage | 360°, square mechanically scalable detection zones; maximum 50 x 50 ft (2,500 sq ft), 15 x 15 m (225 sq m), for major motion as described by NEMA WD7 |
| Daylight sensing | Closed loop daylight sensor; light level setting 10 to 1000 lux (1 to 100 fc) |
| Zūm Link | (2) orange RJ-45 ports for in-room daisy-chaining; maximum 750mA pass-through current including any internal power supply |
| Power | Zūm Link power bus; 17 mA maximum current consumption |
| Indicators | (3) blue LEDs on the sensor head, flash at start-up and when triggered |
| Mounting | Directly in the ceiling, 4 in. square or round junction boxes or 3 in. mud rings (not included) |
| Enclosure | Plastic; IP20 |
| Operating temperature | 0° to 40°C (32° to 104°F) |
| Dimensions | Height 121 mm (4.73 in), width 121 mm (4.73 in), depth 72 mm (2.82 in) |
Part numbers on this page
| Part number | Version | Price | Add |
|---|---|---|---|
| ZUMLINK-IR-QUATTRO-HD-DLS | Standard | On request |
Where the ZUMLINK-IR-QUATTRO-HD-DLS is used
Works with the ZUMLINK-IR-QUATTRO-HD-DLS
Crestron installed by 1Install
We supply, install and programme Crestron in homes and businesses across Ireland. These photos are from our own installations. See more in our projects, or budget a whole system with our Quote Builders for homes and meeting rooms.



Questions about the Crestron ZUMLINK-IR-QUATTRO-HD-DLS
What is the Crestron ZUMLINK-IR-QUATTRO-HD-DLS?
It is a STEINEL high-definition passive infrared presence detector with daylight sensing and Zūm Link communication, part of the Zūm wired lighting control range. It mounts in the ceiling, uses four infrared detectors across a 360° pattern, measures daylight with a closed loop sensor and takes its power from the Zūm Link bus.
How does the ZUMLINK-IR-QUATTRO-HD-DLS differ from the ZUMLINK-IR-QUATTRO-DLS?
Both are Zūm Link passive infrared detectors with daylight sensing. The HD model is specified with four infrared pyroelectric detectors and a maximum zone of 50 x 50 ft (2,500 sq ft), while the ZUMLINK-IR-QUATTRO-DLS lists one detector and up to 30 x 30 ft (900 sq ft). Crestron's titles for the two are identical, so go by the full part number.
Does the ZUMLINK-IR-QUATTRO-HD-DLS include a relay?
No. It provides presence detection and daylight sensing without an output relay. The ZUMLINK-IR-QUATTRO-HD-DLS-RLY is the high-definition version with an additional relay for HVAC control or another relay-input capable device, with normally open, normally closed and common connections.
How is it powered and connected?
It is powered from the Zūm Link bus and draws a maximum of 17 mA. Two orange RJ-45 ports connect it to load controllers, keypads and other Zūm wired devices in the room over CBL-CAT5E-ZUMLINK-P CAT5e cable, sold separately, with up to 750mA of pass-through current for daisy-chaining.
How is it mounted and how big is it?
The plastic sensor mounts directly in the ceiling, in a 4 in. square or round junction box, or on a 3 in. mud ring, none of which are included. It measures 121 mm by 121 mm with a depth of 72 mm, carries an IP20 rating and is designed for 0° to 40°C.
How much is the Crestron ZUMLINK-IR-QUATTRO-HD-DLS?
Crestron asks its dealers to give the price of the ZUMLINK-IR-QUATTRO-HD-DLS directly rather than publish it online. Add it to your quote list and we will send you a written quote, with delivery, and installation and programming if you need them.
Can 1Install supply, install and programme the ZUMLINK-IR-QUATTRO-HD-DLS?
Yes. 1Install is an authorised Crestron Elite Partner with offices in Skerries, Co. Dublin and Cork. We can supply the ZUMLINK-IR-QUATTRO-HD-DLS on its own, or install, set up and programme it as part of your system. Installation visits are €440 for 4 hours or €880 for a full day, plus VAT and travel.
Does the ZUMLINK-IR-QUATTRO-HD-DLS come with a warranty?
Yes. Everything we supply is new, genuine Crestron with Crestron's standard warranty. If the ZUMLINK-IR-QUATTRO-HD-DLS develops a fault, contact us and we will handle the claim with Crestron. If we installed it, our workmanship is guaranteed for the lifetime of the system.
Is the ZUMLINK-IR-QUATTRO-HD-DLS in stock?
We order Crestron for each quote, so availability depends on Crestron's stock at the time. We check it before we quote and put the expected delivery date on your quote, so you know where you stand before you pay.
Can I buy the ZUMLINK-IR-QUATTRO-HD-DLS without installation?
Yes. We supply Crestron to end users, with or without installation. Like most Crestron devices of this type, it needs setting up or programming before it works in a system, and we can quote for that too.
More from Lighting control
-
CLWI-DIMUEX
Universal Phase In-Wall Dimmer, 230VAC
Price on request Choose version -
CLWI-DIMUNEX
Universal Phase In-Wall Dimmer with Neutral Wire, 230 VAC
Price on request Choose version -
CLWI-SWEX
In-Wall Switch, 230VAC
Price on request Choose version -
CLCI-DIMUEX
In-Ceiling Dimmer, infiNET EX Wireless, 230VAC
Price on request -
CLXI-2DIMU8
8 Channel Universal Dimmer Module, 2 Feeds, 230V
Price on request -
DIN-1DIMU4
4 Channel Universal Dimmer, 1 Feed, DIN Rail Mount
Price on request