Crestron shop

Crestron ZUMLINK-DT-QUATTRO-DLS-RLY Dual-Tech Sensor with Relay

Crestron part number ZUMLINK-DT-QUATTRO-DLS-RLY

The Crestron ZUMLINK-DT-QUATTRO-DLS-RLY is a STEINEL ceiling-mount presence detector for Zūm wired lighting control that combines passive infrared and ultrasonic sensing with a built-in daylight sensor. Its output relay can also be used for HVAC control or to switch another relay-input capable device.

Price on request

The price isn't hidden. Crestron asks its dealers to share it with you directly rather than publish it online, so tap Request a quote and we'll send it straight to you.

Prefer to talk? Dublin 01 906 9326 Cork 021 202 8107 WhatsApp us

Installation and programming

Need it installed? Our Crestron certified engineers install, set up and programme everything we supply. A 4 hour visit is €440 and a full day €880, plus VAT.

Book an installation
Crestron ZUMLINK-DT-QUATTRO-DLS-RLY Dual-Tech Presence Detector with Daylight Sensing, HVAC Control, and Link Communication for Zūm Wired Lighting Control

About the Crestron ZUMLINK-DT-QUATTRO-DLS-RLY

Presence is detected with dual technology: passive infrared (PIR) from a single pyroelectric detector plus 40 kHz ultrasonic, across a 360° coverage pattern. Crestron gives maximum zones of 50 x 40 ft (2,000 sq ft), or 15 x 12 m (180 sq m), for PIR and 40 x 30 ft for ultrasonic. A closed loop daylight sensor with a 10 to 1000 lux (1 to 100 fc) setting lets the lighting respond to natural light as well as occupancy to save energy.

It is a wired device for Zūm commercial lighting systems. Two orange RJ-45 Zūm Link ports daisy-chain it with the load controllers, keypads and other sensors in the room over CBL-CAT5E-ZUMLINK-P CAT5e cable, which is sold separately. It communicates over the Zūm Link network, takes its power from the Zūm Link bus with a maximum draw of 28 mA, and is compatible with the Zūm wired keypad.

The relay has normally open (green), normally closed (blue) and common (red) connections, and the control output is rated 1A at 30VAC/VDC. The plastic housing mounts directly in the ceiling, in a 4 in. square or round junction box or on a 3 in. mud ring (not included), and measures 121 mm square by 67 mm deep. It is IP20 rated and UL Listed. Crestron offers twelve Zūm Link presence detectors, so match the full part number when replacing one.

Key features

  • Dual-technology detection: passive infrared plus 40 kHz ultrasonic
  • 360° coverage pattern
  • Closed loop daylight sensor with a 10 to 1000 lux setting
  • Output relay for HVAC control or another relay-input capable device
  • Two orange RJ-45 Zūm Link ports for in-room daisy-chaining
  • Powered from the Zūm Link bus, 28 mA maximum
  • Compatible with the Zūm wired keypad
  • Ceiling mount, IP20 rated and UL Listed

ZUMLINK-DT-QUATTRO-DLS-RLY specifications

DetectionDual technology: passive infrared (PIR) and ultrasonic (40 kHz); single infrared pyroelectric detector; 360° coverage
Detection zonesMajor motion as described by NEMA WD7; PIR maximum 50 x 40 ft (2,000 sq ft), 15 x 12 m (180 sq m); ultrasonic maximum 40 x 30 ft
Daylight sensingClosed loop daylight sensor; light level setting 10 to 1000 lux (1 to 100 fc)
Output relayNormally open (green), normally closed (blue), common (red); control output 1A @ 30VAC/VDC
Zūm Link(2) orange RJ-45 ports for in-room daisy-chaining; maximum 750mA pass-through current including any internal power supply
PowerZūm Link power bus; 28 mA maximum current consumption
Indicators(3) blue LEDs on the sensor head, flash at start-up and when triggered
MountingDirectly in the ceiling, 4 in. square or round junction boxes or 3 in. mud rings (not included); plastic housing
Environmental0° to 40°C (32° to 104°F); IP20
DimensionsHeight 121 mm (4.73 in), width 121 mm (4.73 in), depth 67 mm (2.63 in)

Part numbers on this page

Part numberVersionPriceAdd
ZUMLINK-DT-QUATTRO-DLS-RLY Standard On request

Where the ZUMLINK-DT-QUATTRO-DLS-RLY is used

  • Commercial rooms with Zūm wired lighting control
  • Spaces where the lighting sensor also handles HVAC control
  • Rooms that need both PIR and ultrasonic detection
  • Daylit rooms using closed loop daylight control

Works with the ZUMLINK-DT-QUATTRO-DLS-RLY

Crestron installed by 1Install

We supply, install and programme Crestron in homes and businesses across Ireland. These photos are from our own installations. See more in our projects, or budget a whole system with our Quote Builders for homes and meeting rooms.

Crestron controlled shelf lighting in a Dublin retail boutique
Crestron controlled shelf lighting in a Dublin retail boutique
Lantern pendants lighting a sweeping staircase in a Malahide home, Dublin
Lantern pendants lighting a sweeping staircase in a Malahide home, Dublin
Country house at dusk with Crestron lighting in Waterfall, Cork
Country house at dusk with Crestron lighting in Waterfall, Cork

Questions about the Crestron ZUMLINK-DT-QUATTRO-DLS-RLY

What is the Crestron ZUMLINK-DT-QUATTRO-DLS-RLY?

It is a STEINEL dual-tech presence detector with daylight sensing and Zūm Link communication, made for Zūm wired lighting control. It mounts in the ceiling, detects presence with passive infrared and ultrasonic sensing, measures daylight with a closed loop sensor, and includes an output relay for HVAC control or another relay-input capable device.

What does RLY mean on the ZUMLINK-DT-QUATTRO-DLS-RLY?

The -RLY models include an additional output relay for a relay-input capable device, which Crestron's title for this model describes as HVAC control. The relay has normally open, normally closed and common connections, and the control output is rated 1A at 30VAC/VDC. Versions without -RLY provide presence detection and daylight sensing only.

How is the ZUMLINK-DT-QUATTRO-DLS-RLY powered and connected?

It is powered from the Zūm Link bus and draws a maximum of 28 mA. Two orange RJ-45 Zūm Link ports let it be daisy-chained with other Zūm wired devices in the room using CBL-CAT5E-ZUMLINK-P CAT5e cable, which is sold separately. The ports allow up to 750mA pass-through current.

What area does this dual-tech detector cover?

It has a 360° coverage pattern. For major motion as described by NEMA WD7, Crestron lists a maximum passive infrared zone of 50 x 40 ft (2,000 sq ft), or 15 x 12 m (180 sq m), and a maximum ultrasonic zone of 40 x 30 ft. The ultrasonic element works at 40 kHz.

How is it mounted and how big is it?

The plastic detector mounts directly in the ceiling, in a 4 in. square or round junction box, or on a 3 in. mud ring; the boxes and rings are not included. It measures 121 mm by 121 mm and 67 mm deep, is IP20 rated, and is designed for 0° to 40°C.

How much is the Crestron ZUMLINK-DT-QUATTRO-DLS-RLY?

Crestron asks its dealers to give the price of the ZUMLINK-DT-QUATTRO-DLS-RLY directly rather than publish it online. Add it to your quote list and we will send you a written quote, with delivery, and installation and programming if you need them.

Can 1Install supply, install and programme the ZUMLINK-DT-QUATTRO-DLS-RLY?

Yes. 1Install is an authorised Crestron Elite Partner with offices in Skerries, Co. Dublin and Cork. We can supply the ZUMLINK-DT-QUATTRO-DLS-RLY on its own, or install, set up and programme it as part of your system. Installation visits are €440 for 4 hours or €880 for a full day, plus VAT and travel.

Does the ZUMLINK-DT-QUATTRO-DLS-RLY come with a warranty?

Yes. Everything we supply is new, genuine Crestron with Crestron's standard warranty. If the ZUMLINK-DT-QUATTRO-DLS-RLY develops a fault, contact us and we will handle the claim with Crestron. If we installed it, our workmanship is guaranteed for the lifetime of the system.

Is the ZUMLINK-DT-QUATTRO-DLS-RLY in stock?

We order Crestron for each quote, so availability depends on Crestron's stock at the time. We check it before we quote and put the expected delivery date on your quote, so you know where you stand before you pay.

Can I buy the ZUMLINK-DT-QUATTRO-DLS-RLY without installation?

Yes. We supply Crestron to end users, with or without installation. Like most Crestron devices of this type, it needs setting up or programming before it works in a system, and we can quote for that too.

More from Lighting control

Browse all of Lighting control

Start a conversation

Let's plan your space together.

Tell us a little about your project and a member of the team will be in touch.

Contact us for a meetup to discuss your needs

WhatsApp us