Crestron GLA-KP-TIMER-N 60-Minute Timer Switch, Neutral Required

It is a 60-minute timer switch for energy management. It gives automatic, timed control of indoor and outdoor lighting from five pushbuttons: 10, 20, 30 and 60 minutes, and off. Crestron aims it at homes, offices, schools, libraries and other small commercial applications.

Yes. The GLA-KP-TIMER-N requires a neutral connection. It is wired with four flying leads, hot (black), neutral (white), load (red) and ground (green), and its line and load voltage is 120 VAC at 60 Hz.

It switches incandescent, CFL, LED, resistive, inductive and motor loads through a single-pole relay. In a single gang it is rated for 20 A (2400 W) resistive, 1800 W incandescent, 20 A inductive and 1 hp motor loads; in two or more gangs the resistive rating is 16 A (1920 W).

Five pushbuttons select 10, 20, 30 or 60 minutes, or off, and four green LEDs light to show that a timer is active. The switch gives timed control for both indoor and outdoor lighting, and 60 minutes is the longest preset.

It is multi-gang mountable with a minimum depth of 2-1/2 in., and the faceplate is sold separately. The switch measures 105 mm high, 45 mm wide and 36 mm deep and weighs 450 g. It operates from 0 to 40°C at 20 to 90% RH, non-condensing.

Crestron asks its dealers to give the price of the GLA-KP-TIMER-N directly rather than publish it online. Add it to your quote list and we will send you a written quote, with delivery, and installation and programming if you need them.

Yes. 1Install is an authorised Crestron Elite Partner with offices in Skerries, Co. Dublin and Cork. We can supply the GLA-KP-TIMER-N on its own, or install, set up and programme it as part of your system. Installation visits are €440 for 4 hours or €880 for a full day, plus VAT and travel.

Yes. Everything we supply is new, genuine Crestron with Crestron's standard warranty. If the GLA-KP-TIMER-N develops a fault, contact us and we will handle the claim with Crestron. If we installed it, our workmanship is guaranteed for the lifetime of the system.

We order Crestron for each quote, so availability depends on Crestron's stock at the time. We check it before we quote and put the expected delivery date on your quote, so you know where you stand before you pay.

Yes. We supply Crestron to end users, with or without installation. Like most Crestron devices of this type, it needs setting up or programming before it works in a system, and we can quote for that too.