Crestron ZUMMESH-KP10A Zum Wireless Rocker Switch Keypad, 100-277V

It is a Zum wireless keypad with a single rocker switch, powered from 100-277V AC. It controls one or more Zum J-Box Load Controllers over Zum Mesh wireless, turning lights on and off, dimming them up or down, and recalling one custom scene preset when the lights are turned on.

It is line powered from 100-277V AC and wired with flying leads. It fits a standard 3-1/2 inch (89 mm) deep electrical box, and a matching decorator-style faceplate is sold separately. This page covers the white smooth version, part number ZUMMESH-KP10A-W-S.

Press the rocker to switch the lights on or off, and press and hold it to raise or lower the dim level. One custom scene preset can be created, and the lights go to that scene whenever they are turned on by pressing the up position of the rocker.

Both are AC powered Zum wireless keypads. The KP10A has a single rocker switch with one scene preset. The KP10B has four pushbuttons labelled ON, SCENE 2, SCENE 3 and OFF, and stores three scene presets, with Scene 1 on the ON button. Both adjust the dim level by pressing and holding.

Zum keypads come pre-programmed for pair and play. The keypad can go into a room alongside Zum load controllers, occupancy or vacancy sensors and a daylight sensor, and the room is then set up with a few button presses. It communicates over Zum Mesh peer-to-peer RF, within a standalone or networked Zum lighting system.

Crestron asks its dealers to give the price of the ZUMMESH-KP10A directly rather than publish it online. Add it to your quote list and we will send you a written quote, with delivery, and installation and programming if you need them.

Yes. 1Install is an authorised Crestron Elite Partner with offices in Skerries, Co. Dublin and Cork. We can supply the ZUMMESH-KP10A on its own, or install, set up and programme it as part of your system. Installation visits are €440 for 4 hours or €880 for a full day, plus VAT and travel.

Yes. Everything we supply is new, genuine Crestron with Crestron's standard warranty. If the ZUMMESH-KP10A develops a fault, contact us and we will handle the claim with Crestron. If we installed it, our workmanship is guaranteed for the lifetime of the system.

We order Crestron for each quote, so availability depends on Crestron's stock at the time. We check it before we quote and put the expected delivery date on your quote, so you know where you stand before you pay.

Yes. We supply Crestron to end users, with or without installation. Like most Crestron devices of this type, it needs setting up or programming before it works in a system, and we can quote for that too.