Occupancy and air quality readings from the Logitech Spot room sensor can now be passed to ten partner platforms, according to Logitech, including Zoom, Q-SYS, Extron and Appspace. For an office deciding how many meeting rooms it really needs, that means the evidence can land in software the facilities or IT team already opens every day.
The announcement in brief
Logitech set out the detail in a post on its Sync hub dated 17 August 2026, 10 New Workplace Partner Integrations for Spot. AV Interactive (avinteractive.com) ran the story on 3 September 2026 with the headline "Logitech launches 10 partner integrations for Spot sensor".
Spot itself is a wall sensor. Logitech's specification sheet describes a millimetre wave radar for presence, with a range of up to 8 m and a field of view of 120 degrees across and 100 degrees up and down, plus a set of air sensors. Those cover CO2 (400 to 10,000 ppm), particulate matter in the PM2.5 and PM10 sizes (0 to 1,000 micrograms per cubic metre), total volatile organic compounds, temperature, humidity and pressure.
What is new is where those numbers can go. Until a sensor's output reaches the system that holds your bookings or your AV alerts, somebody has to compare two screens by hand. Logitech says it has opened Spot data to partners through its CollabOS and Sync Cloud APIs, and the ten integrations are what it has to show for it.
Three questions Logitech Spot data can help answer
We find it more useful to start from the questions an office is trying to settle than from a feature list.
Do we have the right number of rooms? Presence data shows when each room was really in use. Among the ten partners, Logitech says VergeSense maps space usage over time and produces peak demand forecasts, and Spaceti sets Spot readings beside floor plans and booking records. Planon, whose building management software is due to receive the same data, is the one integration the post labels as coming soon.
Why are rooms booked but empty? Logitech says Appspace can use presence to check people in without any action on their part and to release what it calls "ghost" meeting rooms. Zoom, it says, takes occupancy and environmental data from Spot, Rally Board 65 and the Rally Bar family into the Zoom Dashboard, where auto release frees desks or rooms left unused. Robin is described as combining sensor data with autonomous AI agents. Inside Logitech's own Sync service, Auto Book and Auto Release sit in the Essential plan.
Is the air in this room being changed often enough? Spot measures CO2 alongside the other air readings, and Logitech's product page lists air changes per hour among its outputs. Logitech states the unit is a RESET Grade B Air Accredited monitor and part of the Works with WELL directory. We would treat the readings as evidence to bring to your building services contractor, not as a health assessment; we make no claim beyond Logitech's accreditation statement.
A fourth group cares less about people and more about equipment. Extron and Q-SYS each connect through the CollabOS API, by a driver and a plugin respectively, so that a control system can read environmental data and meeting status from the Logitech device in the room. Utelogy connects through Sync Cloud, and Xyte brings room signals into wider operations across equipment from several makers. If your meeting room AV is already monitored through one of those four, Spot becomes one more data point on a screen you have.
From the wall to the platform: how the data travels
There are two hops, and both need a decision.
The first hop is out of the sensor. Spot speaks Bluetooth to select CollabOS devices, which are Logitech's own room products, or LoRaWAN to a gateway. The gateway Logitech names is the Kerlink iFemtocell Wirnet. Bluetooth is the natural choice where a room has a Logitech host device; Logitech's compatibility notes add that Bluetooth mode currently requires that device to run in Appliance Mode. LoRaWAN suits open areas, phone booths and small rooms with no host.
The second hop is from Logitech to the partner. Some integrations read the host device directly through the CollabOS API. Others go by way of Sync Cloud. According to Logitech's compatibility article, the CollabOS APIs, Extron and Q-SYS need no licence, VergeSense, Appspace, Xyte and Spaceti are partner integrations that it says to contact your account team to enable, and occupancy or room health insights within Sync require the Sync Plus, Essential or Select plan, not the Basic plan.
A planning checklist for Dublin and Cork offices
- List the rooms and the question for each. A boardroom that is always full and a huddle room nobody books are different problems. Write down what you want to learn.
- Measure against the radar. Logitech quotes 8 m of reach. In a long room, check the far seats fall inside that distance and inside the field of view from the proposed wall position.
- Identify a host or a gateway. Note which rooms have a CollabOS device. For the remainder, plan where a LoRaWAN gateway would sit and how it joins the network. Your IT team will want it on the right VLAN and documented like any other device.
- Choose battery or mains. The battery is a D size lithium thionyl chloride cell, rated by Logitech for up to four years in optimal conditions. The alternative is USB-C at 5 V, 0.5 A, with the cable bought separately. Battery avoids chasing a wall; USB-C avoids a replacement round.
- Decide the fixing. The box includes a bracket with adhesive and two screws. The unit weighs 300 g and measures 50 by 134 by 98 mm.
- Pick the destination platform first. If you already hold a Zoom, Appspace or Q-SYS estate, start there and confirm the licence or enablement step above.
- Agree who reads the reports. Data nobody reviews changes nothing. Name the person in facilities or IT who will look at occupancy monthly.
- Ask for a quotation. Logitech's product page carries no price for the sensor, so we cannot state one here.
Where 1Install comes in
1Install designs, supplies and installs meeting rooms and video conferencing systems, including Microsoft Teams Rooms in Dublin and Cork. We are reporting Logitech's announcement here, not describing a Spot project of our own.
Where a sensor of this kind belongs in a scheme, it is decided with the rest of the room: the video bar or scheduling panel that will host it, the cable route if it is to be powered, and the network port for any gateway. Those are small lines on a drawing and awkward things to retrofit. If you are costing a room now, the meeting room quote builder gives a starting figure for the AV, and we can add sensing to the conversation from there.
Questions we are often asked
What exactly is Logitech Spot?
It is a wall mounted sensor that detects presence by radar and measures air quality, including CO2, particulates, volatile organic compounds, temperature and humidity. Logitech positions it as a source of room use and environmental data for the workplace.
Which ten platforms are on the list?
Appspace, Extron, Planon, Q-SYS, Robin, Spaceti, Utelogy, VergeSense, Xyte and Zoom. Logitech's post marks the Planon integration as coming soon, and its compatibility article gives Utelogy the same status.
Does every room need a Logitech video bar?
No. Bluetooth pairing needs a select CollabOS device as host, but Logitech also supports LoRaWAN through a Kerlink iFemtocell Wirnet gateway where there is no host device.
Is there a subscription?
Logitech's Sync service has a Basic plan and three higher plans, Sync Plus, Essential and Select. Which you need depends on the integration: Logitech's compatibility article sets out the requirement for each one.
What warranty does Logitech give?
The specification sheet states a two year limited hardware warranty, with extended options.
Book a consultation or call Dublin on 01 906 9326 or Cork on 021 202 8107.
- Log in to post comments